GBC TITAN 110 Operation & Maintenance Manual page 48

Titan 110/ 165 Operation and Maintenance Manual
Feed table
INFORMATION
The laminator will operate only when
all safety latches are in the fully
latched position.
a) Press POWER to " I " .
On/ Off
c) Press SPEED
© GBC Films Group November 2000
to " 5 ".
c) Press .
R U N
d) Under the left side of the feed table, slide the
safety latch to the right. Bottom rollers stop.
e) Release the safety latch, the bottom rollers
revert to turning.
INFORMATION
Locator pins on the pressure plate are
not associated with an interlock switch.
The laminator can operate without
the pressure plate installed.
Installation
Page 4 - 11