GBC TITAN 110 Operation & Maintenance Manual page 53

Installation
p) Press JOB
decreases with a maximum setting of 1.
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
q) Raise the front safety shield and touch the upper
and lower main rollers. They should feel warm
to the touch.
Page 4 - 16
. Numeric value for JOB
WARNING
Titan 110/ 165 Operation and Maintenance Manual
r) Lower the front safety shield to its fully closed
position.
The laminator will operate only when
all safety latches are in the fully
s) Press TOP TEMPERATURE
BOTTOM TEMPERATURE
Numeric values decrease with a minimum
setting of 32
© GBC Films Group November 2000
INFORMATION
latched position.
o o
F ( 0 C ).
then
.