GBC TITAN 110 Operation & Maintenance Manual page 62

Titan 110/ 165 Operation and Maintenance Manual
( 14 ) SPEED : When pressed, increases the
speed number displayed. Maximum input value is 9.
INFORMATION
When the input value for JOB is
changed, the parameters stored within
that number are displayed.
( 15 ) SPEED : When pressed, decreases the
speed number displayed. Minimum input value is 1.
© GBC Films Group November 2000
( 16 ) DISPLAY: indicates what parameters are
currently set at. Also indicates what mode the laminator
is currently in.
14
READY - Heaters are at operating temperature.
WAIT - Heaters are not at operating temperature
AUTO-OFF - Laminator is stand-by mode.
15
TOP
TEMPERATURE
BOTTOM
TEMPERATURE
Operations
SPEED
JOB
Page 5 - 5