GBC TITAN 110 Operation & Maintenance Manual page 59

Operations
( 2 ) MEMORY
M E M O R Y
the current parameter settings in the displayed job
location.
INFORMATION
Job programming is explained in
Section 5.7
( 3 ) MEASURE
M E A S U R E
display for the top temperature and bottom temperature
from set point to actual roller temperature. The display
will only show actual temperature while
depressed.
Page 5 - 2
: When pressed twice, stores
2
: When pressed, changes the
M E A S U R E
3
Titan 110/ 165 Operation and Maintenance Manual
( 4 ) COOLING
cooling fans on or off depending on the current state
of the fans when pressed.
If is illuminated, the cooling fans
COOLING
are in the "on" position.
( 5 ) RUN
R U N
the motor and the rollers begin to turn in a forward
direction at the current speed set in the display.
is
© GBC Films Group November 2000
: When pressed, turns the
COOLING
4
INFORMATION
: When pressed, supplies power to
5