GBC TITAN 110 Operation & Maintenance Manual page 91

Troubleshooting
Hints: • Check the roll pressure
• Check the main roll nip settings
• Check the pull roll nip settings
Problem: Straight waves in the output
Cause: Excessive heat at the nip rollers
Hints: • Check operational settings for materials
being used.
Problem: Waves on only one side of the output
Cause: Insufficient roller pressureon one side.
Page 7 - 2
Titan 110/ 165 Operation and Maintenance Manual
Hints: • Check the nip setting of main rolls
• Check the nip setting of pull rolls
• Check for even paper tension
Problem: Angled waves in the output on both sides
Cause: Slight amount of insufficient roller pressure.
© GBC Films Group November 2000