GBC TITAN 110 Operation & Maintenance Manual page 25

Safety
Remove power from the laminator before
servicing. You can be severely shocked,
killed or cause a fire.
The following procedure is performed
while the laminator is HOT!
Use extreme caution!
Heating components are HOT!
You can become severely burned !
Never clean the rollers with sharp or
pointed objects. You may put
irreparable cuts into the rollers.
Page 1 - 14
ELECTRICAL
S H O C K
CAUTION
WARNING
CAUTION
Titan 110/ 165 Operation and Maintenance Manual
Harden adhesive deposits on the rollers can
cause damage to the rollers.
Do NOT pick or pull heat activated adhesive
off the rolls when they are cold. You can
cause irreparable damage to the
The most efficient time to clean the rollers is
after a lamination process is completed.
The laminator will operate only when
all safety latches are in the fully
© GBC Films Group November 2000
CAUTION
CAUTION
laminating rolls.
INFORMATION
INFORMATION
latched position.