GBC TITAN 110 Operation & Maintenance Manual page 46

Titan 110/ 165 Operation and Maintenance Manual
Removing the shrink wrap
a) Gently unwrap the shrink wrap from around the
laminator.
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
Moving the laminator
a) Have the laminator lifted off the skid and
placed on the floor by licensed riggers.
Do not attempt to move the laminator across
anything other than a flat level surface
without trained and qualified riggers. You
can be crushed or seriously injured.
© GBC Films Group November 2000
CAUTION
WARNING
W A R N IN G
T he T itan 110/ 165 L am inator is a large and
heavy piece of equipm ent. It is necessary to
em ploy L IC E N SE D R IG G E R S O N L Y to
m ove the lam inator. T he lam inator is not
designed to be tipped up or sidew ays in any
w ay. Such action disturbs the exact
alignm ent of the rolling parts of the m achine
and requires extensive realignm ent. Y ou can
be crushed or seriously injured.
INFORMATION
GBC Films Group's warranty does not
cover malfunction of the equipment due to
mishandling and / or tipping. GBC Films
Group bears no responsibility for personal
injury or damage due to moving the
laminator improperly.
b) Remove any plastic strapping and/or packing
paper taped to the machine.
CAUTION
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
Installation
Page 4 - 9