Warranty
2. Damage to the machine caused by lifting, tilting
and/or any attempt to position the machine other
than rolling on the installed castors on even
surfaces.
3. Improper use of the machine.
4. Damage due from unqualified person(s) servicing the
machine.
Qualified
• Any engineer that has experience with
electrical and mechanical design of lamination
equipment.The engineers should be fully aware of all
aspects of safety with regards to lamination equipment.
• Any commissioning or service engineer must
be of competent nature, trained and qualified to GBC
Pro-Tech standards to fulfill that job. This person will
have completed and passed the full service training
course from GBC Pro-Tech.
• Any GBC Technician, GBC Specialist, and /
or GBC Pro-Tech Technician that has been through the
GBC Pro-Tech service training course.
Page 2 - 2
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000