GBC TITAN 110 Operation & Maintenance Manual page 77

Applications
a) Press power to " ON ".
b) Place the roll of pressure sensitive laminate on
the upper unwind shaft and center on the main
rollers.
c) Remove the safety shield and set aside for now.
Page 6 - 2
Titan 110/ 165 Operation and Maintenance Manual
Caution should always be exercised
when using the laminator with
the safety shields removed.
You can be seriously HURT or INJURED!
d) Remove the feed table and position the roll of
pressure sensitive mount adhesive onto the
lower unwind shaft.
e) Bring the mount adhesive up to the roll of
laminate and adjust to match and secure the
upper and lower rolls in place. Rewind the
mount adhesive.
© GBC Films Group November 2000
WARNING