GBC TITAN 110 Operation & Maintenance Manual page 81

Applications
b) Carefully pull back approximately 1 in. ( 2.5
cm ) of the release liner from the back of the
image
c) Align the edge of the image you just peeled the
release liner from with the leading edge of the
substrate and tack down.
INFORMATION
Avoid tacking at the ends first and pressing
towards the center, you may create a tunnel
once you have reached the center. This will
make for a difficult mounting application.
Page 6 - 6
Titan 110/ 165 Operation and Maintenance Manual
Caution should always be exercised
when using the laminator with
the safety shield removed.
You can be seriously HURT or INJURED!
d) Remove the safety shield.
e) Position the leading edge ( the tacked image
edge ) of the substrate into the main roller nip
and lower the roller.
© GBC Films Group November 2000
WARNING