GBC TITAN 110 Operation & Maintenance Manual page 92

Titan 110/ 165 Operation and Maintenance Manual
Hints: • Check for insufficient main roller pressure
• Check for insufficient pull roller pressure
• Check the main roller nip settings
• Check the pull roller nip settings
Problem: Indent waves in output after the pull rollers
Cause: Handling the web before it has a chance to
cool.
Hints: • Insufficient cooling time
• Allow output to cool before handling
• Check operating temperatures of material
Problem: Evenly spaced bubbles in the web.
Cause: Bowed rollers
© GBC Films Group November 2000
bubble
bubble
bubble
bubble
bubble
bubble
bubble
bubble
Hints: • Check for consistent distance between
bubbles.
• Verifythat bubbles are present with and
without paper in the web.
Problem: Sparatic bubbles in the web
Cause: Excessive moisture
Hints: Store prints in a dry place.
Troubleshooting
Page 7 - 3