GBC TITAN 110 Operation & Maintenance Manual page 78

Titan 110/ 165 Operation and Maintenance Manual
f) Guide the upper laminate under the upper idler
and separate the release liner from the laminate.
g) Tape the release liner to the rewind tube and
allow the laminate to hang over the main rollers.
h) Pull the mount adhesive up to the nip and tack it
to the laminate hanging over the rollers.
© GBC Films Group November 2000
i) Grip the web and the upper main roll while
turning towards the nip opening.
j) Manually turn the rewind tube to roll the release
liner back to the upper idler.
k) Replace the feed table.
Applications
Page 6 - 3