Installation - GBC TITAN 110 Operation & Maintenance Manual

Safety
To continue operation, both E-STOPS must
be in the up position. To reset the E-STOP, twist the
button 1/4 turn clockwise.
Rotate 1/4 turn
INFORMATION
The laminator will operate only when
all safety latches are in the fully
latched position.
Page 1 - 4
Titan 110/ 165 Operation and Maintenance Manual

1.3 Installation

The following symbols are positioned at
various points in Section 4 Installation.
Failure to follow the pre-installation check
list can result in damage to the laminator.
The operating environment must be free of
dust, flammable liquids and vapors. You can
be injured by inhaling chemical vapors.
Vapor build up or stored flammable liquids
can cause a fire. Excessive dust can damage
© GBC Films Group November 2000
CAUTION
WARNING
WARNING
the laminator.