Control Panel Check - GBC TITAN 110 Operation & Maintenance Manual

Titan 110/ 165 Operation and Maintenance Manual

4.7 Control panel check

The control panel should be checked to ensure
all controls function properly.
For a detailed explanation of the control panel
and footswitch refer to Section 5 Operations.
INFORMATION
When any command is pressed on the
control panel, an audible "beep" will
be heard for each increment of
change or each press.
a) Press POWER to " I " .
On/ Off
© GBC Films Group November 2000
b) Press . The display indicates AUTO-
STAND-BY
OFF mode in the lower right corner.
c) Press again. The display indicates
STAND-BY
READY mode in the lower left corner.
d) Press . An audible beep is heard.
M E M O R Y
is explained in Section 5 Operations
M E M O R Y
Installation
Page 4 - 13