Task 12: Configure The Director To The Management Application - IBM TotalStorage SAN140M Installation And Service Manual

Task 12: Configure the director to the management application

6. Enter information in fields as directed by the customer:
• Description - Type a new user name up to 16 alphanumeric
characters in length. Control characters and spaces are not
valid. The user name is case-sensitive.
• Email Address - Type one or more new user e-mail addresses.
Separate multiple addresses with a semicolon.
• User ID - Type a unique user ID for the new user.
• Secure password - Type a password up to 16 alphanumeric
characters in length. Control characters and spaces are not
valid. The password is case-sensitive.
• Retype Password - To confirm the password, enter the
password exactly as in the Secure Password field.
7. To enable e-mail notification for the new user, select (click) the
Enable check box. An unchecked box indicates e-mail notification
is not enabled.
8. To configure event types for which e-mail notification is sent,
select (click) the Filter link. The Define Filter dialog box displays.
For instructions on defining event filters, refer to the EFC Manager
Software Release 9.0 User Manual (620-000170).
9. Click OK to accept the information. Close all dialog boxes and
return to the EFCM main window.
To manage a new director, it must be identified to and discovered by
the SAN management application. To identify the director:
1. At the EFCM main window, select Setup from the Discover menu.
The Discover Setup dialog box displays.
2. Click Add. The Address Properties dialog box displays with the IP
Address page open by default
3. Type a director description in the Description field.
4. Type the director IP address (determined by the customer) in the
IP Address field.
5. Type the director subnet mask (determined by the customer) in
the Subnet Mask field.
(Figure 35).
Chapter 2: Installation tasks 67