IBM TotalStorage SAN140M Installation And Service Manual page 303

Event code: 063
Message: Remote switch has too many ISLs.
Severity: Major.
Explanation: The fabric element (director or switch) whose domain ID is indicated in the event data has too many ISLs
attached, and that element is unreachable from this director. Element Manager application Version 3.2 and earlier
supports up to 32 ISLs. Element Manager application Version 3.3 and later supports up to 128 ISLs.
Action: Reduce the ISLs on the indicated fabric element to a number within the limits specified.
Event Data: Byte 0 = domain ID of the fabric element (director or switch) with too many ISLs.
Bytes 1 - 3 = reserved.
Distribution: Director
Nonvolatile
System
Event Log
Event code: 064
Message: ESS response from indicated domain not received after maximum tries exhausted.
Severity: Informational.
Explanation: The fabric controller software detected that the ESS response from the indicated domain has not been received
after the maximum number of attempts. Event posts in IBM interop mode only.
Action: No action required.
Event Data: Byte 0 = domain ID of the fabric element (director or switch) not receiving a response to an ESS message.
Byte 1 = domain ID of the fabric element (director or switch) not responding.
Bytes 2- 3 = reserved.
Distribution: Director
Nonvolatile
System
Event Log
Management Server
System Event Log
Error LED
Management Server
System Event Log
Error LED
E-Mail Call-Home
E-Mail Call-Home
Appendix A: Event code tables
Host
Sense Info Link Incident
Host
Sense Info Link Incident
271