Table of Contents
Advertisement
NO
YES
↓
A FRU failure, power-on self-test (POST) failure, link
incident, interswitch link (ISL) problem, fenced E_Port, or
segmented E_Port is indicated. To obtain event codes that
identify the failure, go to
4
Is the product management interface (browser PC, management
server, or OSI host console) powered on and operational?
NO
YES
↓
Go to
step
7.
5
Power on the management interface platform and launch the
associated management application:
• EFCM Basic Edition -
Edition interface (optional)
• SAN management application -
password and network addresses
management server desktop
• OSI host console - Refer to documentation supplied with the
host system for instructions.
Was the maintenance action successful?
NO
YES
↓
Go to
step
7.
6
Inspect the management interface for communication link failure.
Observe one of the following:
• A Page cannot be found, Unable to locate the server, HTTP 404
- file not found, or similar message (browser PC).
•
The icon representing unknown status displays in the status area
(SAN management application).
Was a failure indication observed?
NO
YES
↓
Communication between the product and management
interface failed. Go to
Exit MAP.
Chapter 3: Maintenance analysis procedures (MAPS)
step
10.
(Task 4: Configure director at the EFCM Basic
on page 33).
(Task 6: Configure server
on page 55 and
on page 57).
MAP 0300: Loss of server
Access the
communication.
103
Advertisement
Chapters
Table of Contents
