Figure 23
Enable or disable host control
Figure 24
CLI view
Perform this procedure to toggle (enable or disable) host control of
the director through the OSMS. To enable or disable OSMS and host
control:
1. Select OSMS from the Configure menu at any view. The OSMS
View displays
(Figure
2. Perform one of the following:
• Click Enable to activate OSMS.
• Click Disable to deactivate OSMS.
3. Check the Enable Host Control check box to activate host control of
the director.
4. Click OK to save and activate changes.
OSMS view
24).
Chapter 2: Installation tasks
45