Table of Contents
Advertisement
MAP 500: Event codes (Continued)
Table 14
Event
Explanation
code
800
High temperature warning (port card thermal sensor).
801
Critically hot temperature warning (port card thermal
sensor).
802
Port card shutdown due to thermal violation.
2
Table 15
lists link incident messages and MAP steps.
Link incident messages
Table 15
Explanation
Link interface incident - implicit incident.
Link interface incident - bit-error threshold exceeded.
Link failure - loss of signal or loss of synchronization.
Link failure - not-operational primitive sequence (NOS) received.
Link failure - primitive sequence timeout.
Link failure - invalid primitive sequence received for current link state.
3
The eight-byte (16-digit) worldwide name (WWN) is not valid or an
unconfigured nickname was used.
a. For the product reporting the problem:
— EFCM Basic Edition - Select Node List from the Product
menu at any view. The Node List View displays.
— Element Manager - Select the Node List tab at any view.
The Node List View displays.
b. At the Port WWN column, inspect the WWN assigned to the port
or attached device.
c. The WWN must be entered in (XX:XX:XX:XX:XX:XX:XX:XX)
format or must be a valid nickname. Ensure a valid WWN or
nickname is entered.
Chapter 3: Maintenance analysis procedures (MAPS)
Action
Go to
step
21.
Go to
step
21.
Go to
step
21.
Action
Go to
step
22.
Go to
step
22.
Go to
step
22.
Go to
step
22.
Go to
step
22.
Go to
step
22.
129
Advertisement
Chapters
Table of Contents
