Internet Protocol (Tcp/Ip) Properties Dialog Box - IBM TotalStorage SAN140M Installation And Service Manual

Figure 29
60 SAN140M Installation and Service Manual

Internet protocol (TCP/IP) properties dialog box

5. The Use the following IP address radio button is enabled and the IP
address and Subnet mask fields display network information
configured while performing
network addresses on page 55.
6. At the Default gateway field, enter the gateway address obtained
from the customer.
7. Select (enable) the Use the following DNS server addresses radio
button. At the Preferred DNS server field, enter the DNS server IP
address obtained from the customer, then click OK to apply the
changes and close the dialog box.
8. Close dialog boxes as appropriate and return to the The Network
and Dial-up Connections window.
9. Record the changed gateway and DNS server addresses.
10. To optionally configure addresses for the public LAN connection
(LAN 1), double-click the Local Area Connection 1 icon and repeat
step 2 through step
11. Close all dialog boxes and return to the Windows desktop.
12. Reboot the server (Access the management server desktop
page 57).
Task 6: Configure server password and
9.
on