Configure Private Lan Addresses; Configure Public Lan Addresses (Optional) - IBM TotalStorage SAN140M Installation And Service Manual

Configure private LAN addresses

Configure public LAN addresses (optional)

56 SAN140M Installation and Service Manual
To configure TCP/IP network information for the private LAN
connection (LAN 2):
1. At the management server LCD panel, press ENTER. The
Welcome!! or operational information message changes to an
Input Password 0**** message.
2. Input the default or changed password, and press ENTER. The
LAN 1 Setting?? message appears at the LCD panel.
3. Press the down-arrow button. The LAN 2 Setting?? message
appears at the LCD panel. Press ENTER and the default IP
address of 10.1.1.1 appears.
4. Input a new IP address, then press ENTER. A Save Change? Yes,
Save!! message appears.
5. Press ENTER. The LAN 2 IP address changes and the default
subnet mask of 255.0.0.0 appears.
6. Input a new subnet mask, then press ENTER. A Save Change?
Yes, Save!! message appears.
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the panel returns to the LAN 1 Setting?? message, and the
LAN 2 subnet mask changes.
8. Record the private LAN IP address and subnet mask for
reference.
To optionally configure TCP/IP network information for the public
LAN connection (LAN 1):
1. At the management server LCD panel, press ENTER. The
Welcome!! or operational information message changes to an
Input Password 0**** message.
2. Input the default or changed password, and press ENTER. The
LAN 1 Setting?? message appears at the LCD panel.
3. Press ENTER and the default IP address of 192.168.0.1. appears.
4. Input a new IP address, then press ENTER. A Save Change? Yes,
Save!! message appears.