IBM TotalStorage SAN140M Installation And Service Manual page 356

Event code: 602
Message: SBAR anomaly detected.
Severity: Informational.
Explanation: Director operational firmware detected a deviation in the normal operating mode or operating status of the
indicated SBAR.
Action: No action required. An event code 604 is generated if the SBAR fails.
Event Data: Byte 0 = SBAR slot position.
Byte 1 = anomaly reason code.
Bytes 4 - 7 = elapsed millisecond tick count.
Bytes 8 and 9 = high-availability error callout #1.
Bytes 10 and 11 = high-availability error callout #2.
Distribution: Director
Nonvolatile
System
Event Log
Event code: 603
Message: SBAR hot-removal completed.
Severity: Informational.
Explanation: An SBAR was removed with the director powered on and operational.
Action: No action required.
Event Data: Byte 0 = SBAR slot position.
Bytes 4 - 7 = elapsed millisecond tick count.
Distribution: Director
Nonvolatile
System
Event Log
324 SAN140M Installation and Service Manual
Management Server
System Event Log
Error LED
Management Server
System Event Log
Error LED
Byte 12 = detecting port.
Byte 13 = connected port.
Byte 14 = participating SBAR.
Bytes 16 and 17 = high-availability error callout #3.
Bytes 18 and 19 = high-availability error callout #4.
E-Mail Call-Home Sense Info
E-Mail Call-Home Sense Info
Host
Link Incident
Host
Link Incident