Table of Contents
Advertisement
Task 7: Configure management server information
Access the management server desktop
5. Press ENTER. The LAN 1 IP address changes and the default
subnet mask of 255.0.0.0 appears.
6. Input a new subnet mask, then press ENTER. A Save Change?
Yes, Save!! message appears.
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the panel returns to the LAN 1 Setting?? message, and the
LAN 1 subnet mask changes.
8. Record the public LAN IP address and subnet mask for reference.
Configure a server computer name and workgroup name from the
Windows operating system, using a LAN-attached PC with standard
web browser.
If required, change the server gateway addresses and domain name
system (DNS) server IP addresses to conform to the customer LAN
addressing plan. The gateway addresses are the addresses of the local
router for the corporate intranet.
To login and access the server desktop:
1. Ensure the management server and a browser-capable PC are
connected through an Ethernet LAN. At the PC, launch the
browser application (Internet Explorer or Netscape Navigator).
2. At the PC, enter the LAN 2 IP address of the server, followed by
:5800, as the Internet uniform resource locator (URL). Use the
following format:
http://xxx.xxx.xxx.xxx:5800
Where xxx.xxx.xxx.xxx is the default IP address of 10.1.1.1 or the
IP address configured while performing
password and network addresses
screen displays.
3. Type the default password and click OK. The Welcome to Windows
dialog box displays.
NOTE: The default TightVNC viewer password is password.
Task 6: Configure server
on page 55. The VNC Authentication
Chapter 2: Installation tasks
57
Advertisement
Chapters
Table of Contents
