IBM TotalStorage SAN140M Installation And Service Manual page 126

94 SAN140M Installation and Service Manual
c. Ensure the Operational State field displays Online and the
Reason field displays N/A or is blank. If an ISL segmentation or
other problem is indicated, go to
analysis procedures (MAPS)
problems are indicated, installation tasks are complete.
7. At the SAN management application physical map, right-click
the director icon, then select Element Manager from the pop-up
menu.
8. Click the Hardware tab. The Hardware View displays.
9. Double-click the graphical port connector used for the fabric ISL
(connected in step 5). The Port Properties dialog box displays.
10. Ensure the Link Incident field displays None, the Operational State
field displays Online, and the Reason field displays N/A or is
blank. If an ISL segmentation or other problem is indicated, go to
Chapter 3, Maintenance analysis procedures (MAPS)
problem. If no problems are indicated, installation tasks are
complete.
Chapter 3, Maintenance
to isolate the problem. If no
to isolate the