Invalid Attachment Reasons And Actions - IBM TotalStorage SAN140M Installation And Service Manual

130 SAN140M Installation and Service Manual
Was the maintenance action successful?
NO YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
4
A port has an invalid attachment.
a. At the Event Log, examine the first five bytes of event data.
b. Byte 0 specifies the port reporting the problem. Byte 4 specifies
the invalid attachment reason

Invalid attachment reasons and actions

Table 16
Byte 4 Invalid attachment reason
01 Unknown
02 ISL connection not allowed.
03, 04 Incompatible switch.
05 Loopback plug connected.
06 N-Port connection not allowed.
07 Non-IBM switch at other end.
08 E_Port capability disabled.
0A Unauthorized port binding WWN.
0B Unresponsive node.
0C ESA security mismatch.
0D Fabric binding mismatch.
0E Authorization failure reject.
0F Unauthorized switch binding WWN.
10 Authentication failure
11 Fabric mode mismatch.
(Table 16).
Action
Contact the next level
of support.
Go to step
Go to step
Go to step
Go to step
Go to step
Go to step
Go to step
Go to step
Go to step
Go to step
Go to step
Go to step
Go to step
Go to step
5.
6.
7.
5.
6.
8.
3.
9.
11.
12.
9.
11.
13.
6.