Maintenance Utility - Oki C810 Maintenance Manual

Oki Data CONFIDENTIAL

5.2 Maintenance Utility

The adjustments described in table 5-2 should be made by using Maintenance Utility. Details
on the utility are as follows:
(1) Maintenance Utility operation manuals:
42678801FU01 Rev. 21 or higher (Japanese)
42678801FU02 Rev. 21 or higher (English)
(2) Maintenance Utility program:
Applicable operating system
Win9X/ME/NT/2000/XP
(Japanese/English)
Table 5-2: Adjustment options in Maintenance Utility
Option Adjustment
1 PU board Copies the information from the EEPROM on
replace- the PU board.
ment Purpose: To copy the information stored on
the EEPROM on the PU board when the board
needs to be replaced with another one due to
maintenance.
2 PU serial Rewrites the serial number recorded on the PU.
number Purpose: To configure a maintenance
setting replacement PU board to which the information
on the EEPROM on the PU board cannot be
copied (due to an interface error).
3 Factory Switches between Factory and Shipping modes.
shipping Purpose: To configure a maintenance
mode replacement PU board to which the information
on the EEPROM on the PU board cannot
be copied (due to an interface error). The
maintenance board is set to the Factory mode
usually by default and, by using this function,
must be set to the Shipping mode.
44015503TH Rev. 1
File name Part number
MuWin.zip 42678801FW01 Rev. 21 or
higher
Section in Operation from
Maintenance operator panel
Utility (section in this
operation maintenance
manual manual)
2.4.1.1.1 Unavailable
2.4.1.1.2.2 Unavailable
2.4.1.1.2.3 5.3.2.10
Option Adjustment
4 CU board Copies the information from the EEPROM on
replace- the PU board.
ment Purpose: To copy the information stored on
the EEPROM on the PU board when the board
needs to be replaced with another one due to
maintenance.
5 Serial Selects the printer serial number recorded
number on the CU to rewrite the output mode and the
information printer's serial number.
setting
6 PCB option Checks serial number information and the
setup Factory/Shipping mode.
informa-tion
7 USB Updates the USB software.
software
update
8 NIC Updates the NIC software.
software
update
9 NIC Web Updates Oki Data's NIC Web page.
page
update
10 Mac Sets the Mac address.
address
setting
11 Consuma- Copies the counter value of each consumable:
ble counter Image drum (y, M, C or K)
mainte- Fuser
nance Belt
function Toner (y, M, C or K)
Purpose: To copy the counter value of each
consumable in the printer to use in another
printer.
5. MAINTENANCE MENUS
Section in Operation from
Maintenance operator panel
Utility (section in this
operation maintenance
manual manual)
2.4.1.1.3 Unavailable
2.4.1.1.4.3 Unavailable
2.4.1.1.7 Unavailable
2.4.2.2.1 Unavailable
2.4.2.2.2 Unavailable
2.4.2.2.3 Unavailable
2.4.2.2.4 Unavailable
2.4.1.2.1 Unavailable
122 /