Adjusting The Front Wheel Static Balance - Yamaha 2002 TDM900 Service Manual

FRONT WHEEL AND BRAKE DISCS
4-6
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be brought
within specification, replace the brake disc.
EAS00549
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
S After replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
S Adjust the front wheel static balance with the
brake discs installed.
1. Remove:
S balancing weight(s)
2. Find:
S front wheel's heavy spot
NOTE:
Place the front wheel on a suitable balancing
stand.
a. Spin the front wheel.
b. When the front wheel stops, put an "X
at the bottom of the wheel.
c. Turn the front wheel 90_ so that the "X
is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an "X
the bottom of the wheel.
f. Repeat steps (d) through (f) several times
until all the marks come to rest at the same
spot.
g. The spot where all the marks come to rest is
the front wheel's heavy spot "X".
CHAS
" mark
1
" mark
1
" mark at
2