Disassembling The Front Wheel - Yamaha 2002 TDM900 Service Manual

FRONT WHEEL AND BRAKE DISCS
4-7
3. Adjust:
S front wheel static balance
a. Install a balancing weight 1 onto the rim ex-
actly opposite the heavy spot "X".
NOTE:
Start with the lightest weight.
b. Turn the front wheel 90_ so that the heavy
spot is positioned as shown.
c. If the heavy spot does not stay in that posi-
tion, install a heavier weight.
d. Repeat steps (b) and (c) until the front wheel
is balanced.
4. Check:
S front wheel static balance
a. Turn the front wheel and make sure it stays at
each position shown.
b. If the front wheel does not remain stationary
at all of the positions, rebalance it.
EAS00523

DISASSEMBLING THE FRONT WHEEL

1. Remove:
S oil seals 1
S wheel bearings
a. Clean the outside of the front wheel hub.
b. Remove the oil seals 1 with a flat-head
screwdriver.
NOTE:
To prevent damaging the wheel, place a rag 2
between the screwdriver and the wheel surface.
c. Remove the wheel bearings 3 with a gener-
al bearing puller.
CHAS