Checking The Rear Wheel Drive Hub; Checking And Replacing The Rear Wheel Sprocket - Yamaha 2002 TDM900 Service Manual

REAR WHEEL, BRAKE DISC
AND REAR WHEEL SPROCKET
2. Check:
S tire
Refer to "CHECKING THE TIRES" in chap-
ter3.
S rear wheel
Damage/wear ! Replace.
3. Measure:
S radial wheel runout
S lateral wheel runout
Refer
WHEEL".
EAS00567

CHECKING THE REAR WHEEL DRIVE HUB

1. Check:
S rear wheel drive hub 1
Cracks/damage ! Replace.
S rear wheel drive hub dampers 2
Damage/wear ! Replace.
EAS00568
CHECKING AND REPLACING THE REAR
WHEEL SPROCKET
1. Check:
S rear wheel sprocket
More than 1/4 tooth a wear ! Replace the
rear wheel sprocket, drive sprocket and drive
chain as a set.
Refer to "SWINGARM AND DRIVE CHAIN".
Bent teeth ! Replace the rear wheel sprock-
et, drive sprocket and drive chain as a set.
Refer to "ENGINE" in chapter 5.
b Correct
1 Drive chain roller
2 Rear wheel sprocket
2. Replace:
S rear wheel sprocket
a. Remove the self-locking nuts and the rear
wheel sprocket.
b. Clean the rear wheel drive hub with a clean
cloth, especially the surfaces that contact the
sprocket.
c. Install the new rear wheel sprocket.
NOTE:
Tighten the self-locking nuts in stages and in a
crisscross pattern.
4-13
CHAS
to "CHECKING
Rear wheel sprocket self-locking
nut
69 Nm (6.9 mSkg)
THE FRONT