Disassembling The Rear Brake Caliper - Yamaha 2002 TDM900 Service Manual

FRONT AND REAR BRAKES
EAS00626
DISASSEMBLING THE REAR BRAKE
CALIPER
NOTE:
Before disassembling the brake caliper, drain
the brake fluid from the entire brake system.
1. Remove:
S brake caliper bolts 1
S union bolt 2
S copper washers 3
S brake hose
S brake caliper
NOTE:
Put the end of the brake hose into a container
and pump out the brake fluid carefully.
2. Remove:
S brake caliper piston 1
S brake caliper piston seals 2
a. Blow compressed air into the brake hose
joint opening a to force out the piston from
the brake caliper.
WARNING
S Cover the brake caliper piston with a rag.
Be careful not to get injured when the pis-
ton is expelled from the brake caliper.
S Never try to pry out the brake caliper pis-
ton.
b. Remove the brake caliper piston seals.
4-38
CHAS
New
New