Installing The Engine - Yamaha 2002 TDM900 Service Manual

ENGINE
EAS00192

INSTALLING THE ENGINE

1. Install:
S collars 1
S adjusting bolt 2
S engine mounting nut (rear lower) 3
S engine mounting nut (rear upper) 4
S engine mounting bolts (front) 5
S pinch bolts 6
S engine bracket bolts 7
NOTE:
S Lubricate the rear mounting bolt threads with
lithium soap base grease.
S Do not fully tighten the bolts.
2. Tighten:
S adjusting bolt 2
S engine mounting nut (rear upper) 4
S engine mounting nut (rear lower) 3
S engine mounting bolts (front) 5
S pinch bolts 6
S engine bracket bolts 7
NOTE:
S Tighten the adjusting bolt 2 to specification
with a pivot shaft wrench 8 .
Pivot shaft wrench
90890-01471
3. Install:
S shift arm 1
NOTE:
S Align the punch mark a in the shift shaft with
the slot in the shift arm.
5-6
ENG
7 Nm (0.7 mSkg)
45 Nm (4.5 mSkg)
45 Nm (4.5 mSkg)
55 Nm (5.5 mSkg)
26 Nm (2.6 mSkg)
30 Nm (3.0 mSkg)
10 Nm (1.0 mSkg)