Disassembling The Swingarm; Assembling The Swingarm - Yamaha 2002 TDM900 Service Manual

SWINGARM AND DRIVE CHAIN

DISASSEMBLING THE SWINGARM

1. Remove:
S dust covers 1
S spacer 2
S oil seals 3
S bearings 4
2. Check:
S oil seals 3
Damage/wear ! Replace.
S bearings 4
Damage/pitting ! Replace.
CHECKING THE CONECTING ARM AND
RELAY ARMS
1. Check:
S connecting arms 1
S relay arm 2
Damage/wear ! Replace.
2. Check:
S bearings 3
S oil seals 4
Damage/pitting ! Replace.
3. Check:
S spacers 5
Damage/scratches ! Replace.

ASSEMBLING THE SWINGARM

1. Install:
S bearings
S oil seals
a. Install the new bearings and oil seals in the
reverse order of disassembly.
NOTE:
Use a socket that matches the diameter of the
bearing outer race and oil seal.
4-76
CHAS
New