Rs485 - Uci Reader Protocol; Clock / Data - Omron Interface; Clock / Data - Wiegand Interface - Siemens AR6181-MX Installation And Configuration Manual

10.3.2 RS485 – UCI reader protocol
PIN_MODE 0x00
0x01
0x02
0x03
PIN_BUF 0x00
0x01 ... 0x07
10.3.3 Clock / Data – Omron interface
10.3.4 Clock / Data – Wiegand interface
Siemens Building Technologies
Fire & Security Products
PIN before transponder
PIN input and completion with E key
PIN input and transponder within 10 seconds
ID mode
PIN code and completion with E key
right, leading zeros
PIN input and transponder within 10 seconds
PIN_MODE = 0x00
Transponder without PIN input
Transponder before PIN
Transponder, LED flashes green and waits 10 seconds for key input
No PIN input:
Only E key: ID card number
PIN input: ID card number with PIN code
PIN before transponder
PIN input with PIN input
PIN input with E key
Enabled (disabled) mode
E key followed by transponder
Pin input, E key followed by transponder
PIN buffer
C key followed by transponder
Pin input, C key followed by transponder
PIN buffer
PIN input and transponder, without E or C key
PIN_MODE = 0x00
Use of default buffer length, depending on the interface. For more information please refer to
C01, PIN_BUF in chapter 8.
Number of permissible PIN digits, autom. completion if number of digits reached; otherwise
finish with E key!
PIN input completed with E key
PIN input with ID card number
separator is D (0x0D), in ABA format
PIN input completed with E key
PIN input with ID card number
separator is D (0x0D), in BCD format
A different way of handling the PIN input is listed with the individual settings.
PIN code is transferred alone, ID card number is 0
ID card number with PIN code
PIN code is transferred as ID card number, aligned
ID card number with PIN code, corresp. with
ID card number; corresp. with PIN_MODE = 0x00
Discard and cancellation
as with PIN_MODE = 0x00
same as with PIN_MODE = 0x00
ID card number with identifier "B" (0x42) in PIN buffer
ID card number with PIN code and identifier "B" in
ID card number with identifier "A" (0x41) in PIN buffer
ID card number with PIN code and identifier "A" in
PIN code in ABA format
ID card number with PIN code,
PIN code in BCD format
ID card number with PIN code,
Configuration parameters
ID card number with PIN code, corresp. with
43
12.2004