Combination Options; Serial Number Rs485 - Cerpass Reader Protocol; Serial Number Rs485 - Uci Reader Protocol; Serial Number Clock / Data - Omron Interface - Siemens AR6181-MX Installation And Configuration Manual

Table of Contents

Advertisement

10.2

Combination options

10.2.1 Serial number
10.2.2 Serial number
10.2.3 Serial number
Siemens Building Technologies
Fire & Security Products
RS485 – CerPass reader protocol
The unique serial number is transferred as a decimal equivalent.
DIP switch
DIP1 . . DIP4 = reader address, DIP5 = 0, DIP6 = 1, DIP7/DIP8 = 0
Parameter:
Transponder:
UID_OUT with UID_START, UID_LNG
UID_MASK, UID_PATTERN
PIN:
PIN_MODE, PIN_BUF (default = 6)
General:
CARD_TEC, TAG_BEEP, TAG_LED, CONFIG_CARD
Transferred:
ID card data:
16 characters in ASCII format of which 13 are ID card number characters,
aligned left, filled with zeros (0x30) – (telegram identifier: Kg)
PIN:
see Setting
RS485 – UCI reader protocol
The unique serial number is transferred as a decimal equivalent.
DIP switch
DIP1 . . DIP4 = reader address, DIP5 = 0, DIP6 = 0, DIP7/DIP8 = 0
Parameter:
Transponder:
UID_OUT with UID_START, UID_LNG
UID_MASK, UID_PATTERN
Output format:
UCI-CODING (default = 0
PIN:
PIN_MODE, PIN_BUF (default = 7)
General:
CARD_TEC, TAG_BEEP, TAG_LED, CONFIG_CARD
Transferred:
ID card data:
UCI_CODING = 0
Card number in BCD / ABA format, 13 digits, aligned right, with leading zeros
With PIN code: No separator between data and PIN.
UCI-CODING =1
Card number in ASCII / SIPASS format, 13 digits, aligned right, with leading
zeros
With PIN code: Separator between data and PIN.
PIN:
see Setting
Clock / Data – Omron interface
The unique serial number is transferred as a decimal equivalent.
DIP switch
DIP1 . . DIP3 = off, DIP4 = 1, DIP5 = 1, DIP6 = 0, DIP7/DIP8 = 0
Parameter:
Transponder:
UID_OUT with UID_START, UID_LNG
UID_MASK, UID_PATTERN
PIN:
No parameters (PIN length is = 8, fixed)
General:
CARD_TEC, TAG_BEEP, TAG_LED, CONFIG_CARD
Transferred:
ID card data:
Card number in ABA format (5-bit), 13 digits, aligned right, filled with zeros
PIN:
see Setting
PIN input CerPass reader protocol in chapter 10.3.1.
PIN input UCI reader protocol in chapter 10.3.2.
PIN input Clock / Data - Omron Interface in chapter 10.3.3.
Configuration parameters
12.2004
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar6182-mx

Table of Contents