Table of Contents
Advertisement
10.2.12 ID number – Wiegand format Clock/Data: Wiegand interface
10.2.13 ID number – Wiegand format Clock/Data: Omron interface
Siemens Building Technologies
Fire & Security Products
The ID number / card number personalized in Wiegand format is transferred.
DIP switch
DIP1 . . DIP3 = off, DIP4 = 0, DIP5 = 1, DIP6 = 0, DIP7 = 0, DIP8 = 1
Parameter:
Transponder:
WG_CD_ss, WG_CD_ee
Direct:
Indirect: MF_MAD, MF_AID1, MF_AID0 (Mifare – MAD)
PIN:
PIN_MODE, PIN_BUF (default = 6)
General:
CARD_TEC, TAG_BEEP, TAG_LED, CONFIG_CARD, A_ID
MF_BLOCK, MF_KEY_TYPE, MF_KEY_NO
MF_UL_BLOCK
SL_BLOCK
Transferred:
ID card data:
The ID number / card number in Wiegand format is output via the Wiegand
interface bit by bit
PIN:
see Setting
The ID number / card number personalized in Wiegand format is transferred.
DIP switch
DIP1 . . DIP3 = off, DIP4 = 1, DIP5 = 1, DIP6 = 0, DIP7 = 0, DIP8 = 1
Parameter:
Transponder:
WG_CC_ss, WG_CC_ee, WG_CC_nn
WG_FC_ss, WG_FC_ee, WG_FC_nn
WG_CN_ss, WG_CN_ee, WG_CN_nn
WG_EV_ss, WG_EV_ee, WG_EV_pp
WG_OD_ss, WG_OD_ee, WG_OD_pp
Direct:
Indirect: MF_MAD, MF_AID1, MF_AID0 (Mifare – MAD), MF_BLOCK
PIN:
PIN_MODE, PIN_BUF (default = 6)
General:
CARD_TEC, TAG_BEEP, TAG_LED, CONFIG_CARD, A_ID
MF_BLOCK, MF_KEY_TYPE, MF_KEY_NO
MF_UL_BLOCK
SL_BLOCK
Transferred:
ID card data:
ID number in Wiegand format is interpreted in accordance with the
WG_xx_ss and WG_xx_ee configuration parameters, converted to a decimal
value, and sent as BCD values in ABA format (5-bit); any possibly required
leading zeros are to be considered during parameterization (WG_xx_nn
parameter)
PIN:
see Setting
MF_BLOCK or MF_UL_Block or SL_BLOCK
PIN input Clock / Data - Wiegand Interface in chapter 10.3.4.
MF_BLOCK or MF_UL_Block or SL_BLOCK
PIN input Clock / Data - Omron Interface in chapter 10.3.3.
Configuration parameters
Mifare Standard
Mifare UltraLight
my-D proximity
Mifare Standard
Mifare UltraLight
my-D proximity
12.2004
41
Hide quick links:
Advertisement
Table of Contents
