Download  Print this page

Defining Parameters; Launching The Terminal Program - Siemens AR6181-MX Installation And Configuration Manual

Hide thumbs

Advertisement

9.1

Defining parameters

9.2

Launching the terminal program

Siemens Building Technologies
Fire & Security Products
Use an editor such as Notepad, for example, to define the Config or ConfigCard
parameters.
For more information about defining the configuration parameters C00-C06 please
refer to chapter 10.1 Config or ConfigCard parameters.
For more information about defining the reader keys Kxx please refer to
chapter 10.4 Defining reading keys with Mifare Standard 1k and 4k.
The program "HyperTerminal" is a component of the Windows operating system.
Use the configuration mode and "HyperTerminal" to exchange data with the reader
AR618x-MX.
In order to be able to use "HyperTerminal" in the configuration mode, the following
settings, depicted below, are required.
1.
Launch the terminal program via the Windows Start menu and then select
Programs-> Accessories-> Communication ->HyperTerminal.
When started successfully this dialog box opens:
Enter a name such as Config_AR618x-MX into the name field.
Card reader configuration
12.2004
25

Advertisement

Table of Contents
loading

  Related Content for Siemens AR6181-MX

This manual is also suitable for:

Ar6182-mx