Defining Reading Keys With Mifare Standard 1K And 4K - Siemens AR6181-MX Installation And Configuration Manual

Configuration parameters
10.4

Defining reading keys with Mifare Standard 1k and 4k

44
Siemens Building Technologies
Fire & Security Products
The reading key is entered into the configuration file in line Kxx.
For more information please refer to chapter 9.1 Defining parameters.
0 1
K00 Mifare reading key no. 00
Key00
0x00 0x00
K01 Mifare reading key no. 01
Key01
0xFF 0xFF
Available Mifare key numbers: 00 ... 31
The shown table is an example:
When using Mifare MAD addressing, the Mifare MAD access key has to be
configured accordingly.
The MAD access key is defined in the MAD specification: A0, A1, A2, A3, A4, A5
0 1
Kxx Mifare reading key no. xx
0xA0 0xA1
Key00
The access key for the MAD-addressed block has to be configured additionally.
(This access key can be freely assigned by the user or is defined when the ID
cards are generated and personalized into the described cards).
0 1
Kyy Mifare reading key no. yy
Key00
0xaa 0xbb
With Mifare cards, a corresponding key (access key) is required in the card reader to read data in
(a) sector(s).
If reading access keys for the sector (directly addressed access) or the reading access keys for the
MAD sector and the data sector (indirect access via MAD) are not loaded into the card reader, the
Mifare cards cannot be read by the card reader.
2 3 4 5
0x00 0x00 0x00
0xFF 0xFF 0xFF
2 3 4 5
0xA2 0xA3 0xA4
2 3 4 5
0xcc 0xdd 0xee
0x00
0xFF
0xA5
0xff
12.2004