Table of Contents
Advertisement
Siemens Building Technologies
Fire & Security Products
Note:
When this command has been sent the reader must not be disconnected from the power supply.
This is acknowledged with the message "ERASE WAIT"
You are now prompted to send the firmware mhx file: "START DOWNLOAD".
You have about 2 minutes to do this.
During this period, the characters "C" and "§" will appear at intervals of
5 seconds. If no mhx file is sent within these 2 minutes, the message
"ERROR 1" will appear and the command "FLASHALL" will have to be
entered once more. Do not disconnect the reader!
8.
Select „Send File" from the „Transfer" menu.
The following dialog box opens:
Enter the desired file into the filename field and Xmodem into the Protocol
field.
9.
Click on „Send" to send the file.
Card reader configuration
12.2004
31
Hide quick links:
Advertisement
Table of Contents
