Information To Be Read Out Of Cards - Siemens AR6181-MX Installation And Configuration Manual

DIP switch settings
7.4

Information to be read out of cards

DIP 7 DIP 8
off
CerPass protocol (RS485)
UCI protocol (RS485)
Clock/Data: Omron
Clock/Data: Wiegand
DIP 7 DIP 8
off
CerPass protocol (RS485)
UCI protocol (RS485)
Clock/Data: Omron
Clock/Data: Wiegand
16
Siemens Building Technologies
Fire & Security Products
According to the communication interface, the information to be read out of the
access cards has to be selected.
Important:
Please ensure that the number of positions analysed and the format of the interface connected can be
processed.
Information to be read
off
UID 13 characters card information, decimal equivalent,
transmitted as a ASCII format
UID 13 digits card information, decimal equivalent,
transmitted as a 5 bit ABA format or a 7 bit SIPASS ASCII format
UID 13 digits card information, decimal equivalent,
transmitted as a 5 bit ABA format
UID 13 digits card information, decimal equivalent
transmitted as a BCD format (4 bit per digit)
No real and compliant Wiegand format, data is BCD coded and transmitted via Wiegand
interface
Please note:
Serial number of the transponder chips of the respective protocol. For further
information please refer to 8.1 Qualified transponder types (ID cards).
Information to be read
on
ID number Wiegand format compliant
ID number
Wiegand format
ID number
Wiegand format
ID number
Wiegand format
ID number
Wiegand format
Please note:
Within this selection only ISO14443A cards with personalized application data
within a sector/block or a block will be read.
The ID number is an information written by the user into the read/write area of the
qualified transponders/cards.
In this case, the ID number is written according to the Wiegand format rules
(26 or 37 bit Wiegand format, others may be possible).
No reaction or malfunction will be at the reader AR6181-MX if other coded cards
are presented.
Serial number
Interpretation of Wiegand format to max. 13 characters,
transmitted as an ASCII format
Interpretation of Wiegand format to max. 13 digits / characters,
transmitted as a 5 bit ABA format or a 7 bit SIPASS ASCII format
Interpretation of Wiegand format to max. 13 characters,
transmitted as a 5 bit ABA format
1:1 transmission of the Wiegand formatted data
Card type
ISO14443A+B, ISO15693
Card type
ISO14443A
12.2004