Caliper Piston Dust Boot Removal; Piston Seal Removal; Bushings And Boots Installation; Piston Seal Installation - Jeep Wrangler 1997 Manual

Hide thumbs Also See for Wrangler 1997:

Table of Contents

DISASSEMBLY AND ASSEMBLY (Continued)

COLLAPSE BOOT

OR SCREWDRIVER

Fig. 47 Caliper Piston Dust Boot Removal

Fig. 48 Piston Seal Removal

(7) Remove caliper mounting bolt bushings and

boots (Fig. 49).

Fig. 49 Mounting Bolt Bushing And Boot

(1) Coat caliper piston bore, new piston seal and

piston with clean brake fluid.

(2) Lubricate caliper bushings, and interior of

bushing boots with Dielectric silicone grease .

Install bushing boots in caliper, then insert

bushing into boot and push bushing into place (Fig.

Fig. 50 Bushings And Boots Installation

(4) Install new piston seal into seal groove with

finger (Fig . 51).

Fig. 51 Piston Seal Installation

(5) Install dust boot on caliper piston and seat boot

in piston groove (Fig . 52).

Fig. 52 Dust Boot On Piston

Troubleshooting