Lamp Systems; Daytime Running Lights (Canada Only); Daytime Running Lamp (Drl) Module - Jeep Wrangler 1997 Manual

8L - 14 LAMPS
GENERAL INFORMATION
DAYTIME RUNNING LIGHTS (CANADA ONLY) . . 14
GENERAL INFORMATION
DAYTIME RUNNING LIGHTS (CANADA ONLY)
The Daytime Running Lights (Headlamps) System
is installed on vehicles manufactured for sale in Can-
ada only. The headlamps are illuminated when the
ignition switch is turned to the ON position . The
DRL module receives a vehicle-moving signal from
the vehicle speed sensor . This provides a constant
headlamps-on condition as long as the vehicle is
moving. The lamps are illuminated at less than 50
percent of normal intensity.
REMOVAL AND INSTALLATION
DAYTIME RUNNING LAMP (DRL) MODULE
REMOVAL
(1)
Disconnect the wire harness connector from the
module .
(2) Remove the screws that attach the module to
the cowl (Fig . 1).
(3) Separate the module from the vehicle.
INSTALLATION
(1)
Position the DRL module on the cowl.
(2) Install the screws .
LAMP SYSTEMS
INDEX
page
TJ
page
REMOVAL AND INSTALLATION
DAYTIME RUNNING LAMP ( RL) MODULE . . . . 14
Fig. 1 DRL
Oodule
DAYTIME
RUNNING
LAMP
MODULE
80a136e4
(3)
Connect the wire harness connector to the mod-
ule.