Front Park[Turn Signal Lamp; Side Marker Lamp; Tail/Stop/Turn Signal/Back-Up Lamp; Center High Mounted Stop Lamp (Chmsl) - Jeep Wrangler 1997 Manual

TJ
REMOVAL AND INSTALLATION (Continued)
(3) Connect the fog lamp wire harness connector .
FRONT PARK[TURN SIGNAL LAMP
REMOVAL
(1) Remove the park/turn signal lamp housing
screws (Fig . 4) .
(2) Separate the park/turn signal lamp housing
from the fender .
(3) Remove the bulb socket (Fig. 5) .
SIDE MARKER LAMP
Fig. 4 ParklFurn Signal Lamp
Fig. 5 ParloTurn Signal Lamp Bulb
INSTALLATION
(1) Install the bulb socket in the lamp housing .
(2) Position the park/turn signal lamp housing in
the fender .
(3) Install the park/turn signal lamp housing
screws .
REMOVAL
(1) From the underside of the fender, remove the
nut attaching the marker lamp to fender.
LAMPS
8L - 11
(2)
Separate lamp from fender.
(3) Rotate bulb socket one-third turn and separate
it from the lamp housing .
INSTALLATION
(1) Install the bulb socket in the lamp housing.
(2) Position the lamp in fender.
(3) Install the nut attaching the marker lamp to
fender.
TAIL/STOP/TURN SIGNAL/BACK-UP LAMP
REMOVAL
(1) Remove the screws attaching the lens to the
tail lamp housing.
(2) Remove the bolts attaching the tail lamp hous-
ing to the body (Fig. 6) .
(3) Separate the lamp housing from the body.
(4) Disengage the electrical connector.
Fig. 6 Tail Lamp Housing
INSTALLATION
(1) Engage the electrical connector.
(2) Position the lamp housing on the body.
(3) Install the bolts attaching the tail lamp hous-
ing to the body.
(4) Install the screws attaching the lens to the tail
lamp housing.
CENTER HIGH MOUNTED STOP LAMP (CHMSL)
REMOVAL
NOTE : It may be necessary to remove spare tire.
(1) Remove the screws attaching CHMSL lamp
housing to the CHMSL bracket .
(2) Disengage the CHMSL wire harness from the
retaining clips.
(3) Remove the cover from the CHMSL contact
buttons.