Removing The Rider Footrest Support (Right Side) - APRILIA RS 50 Workshop Manual

Cycle Parts
RS 50
Remove gear lever (1) (REMOVING THE GEAR
LEVER).
3
Loosen and remove screws (2).
Tightening torque for screws (2):
25 Nm (2.5 kgm) [18.4 ft-lb]
2
Remove rider footrest support (3) complete with 4
footrest (4).
If necessary remove the footrest (REMOVING THE
RIDER FOOTREST).
1
REMOVING THE RIDER FOOTREST SUP-
PORT (RIGHT SIDE)
Read through the section PRECAUTIONS AND
GENERAL INFORMATION.
Place the vehicle on the stand.
CAUTION
Allow the engine and the exhaust terminal to cool
down completely.
Remove rear brake control lever (5) (REMOVING
7
THE REAR BRAKE).
Loosen and remove screws (6).
6
Tightening torque for screws (6):
10 Nm (1.0 kgm) [7.4 ft-lb]
10
Fasten rear brake pump (7) to the frame in a vertical
8
position using adhesive tape.
5
9
Loosen and remove screws (8).
Tightening torque for screws (8):
25 Nm (2.5 kgm) [18.4 ft-lb]
Remove rider footrest support (9) complete with
footrest (10).
If necessary remove the footrest (REMOVING THE
RIDER FOOTREST).
7-26
chap. 7
Release 00 2000-11