Error Code Description - Canon Laser Class 810 Basic Operation Manual

Error Code
#0005 –
–
#0009
The paper has run out or the paper
cassette s not set properly.
#0012 You could not send because the other
party's fax machne s out of paper.
#0018
There s no reply when you redal.
You could not send, because your fax
sgnal was not returned as the other
party's lne was engaged.
#0037
The memory s full.
#0703 The memory for mage data s full
when sendng documents.
#0705
The send operaton was nterrupted
because the sze of the mage data
s larger than that specfed n <MAX
TX DATA SIZE> n <E-MAIL/I-FAX> n
<COMMUNICATIONS> n <SYSTEM
SETTINGS>.
#0751
The server s not functonng. The
network s down (the server s unable
to connect to the network or was
dsconnected).
11-14
Description
The other fax machne dd not
respond wthn 35 seconds.
The other party may not be usng a
G3 fax machne.
Action
– Send the document agan. Contact
the other party and have them
check ther fax machne. If you
are makng an overseas call, add a
pause to the number.
– Check wth the other party and
send the document to a G3 fax
machne. If the other party does
not have a G3 fax machne, try
sendng your document usng
a transmsson mode the other
party's fax machne supports.
Load the paper or reset the paper
cassette properly.
Contact the other party and ask them
to load the paper.
Check that the other party's lne s
not engaged and try agan from the
begnnng.
Prnt, send, or delete any documents
stored n memory.
– Wat a few moments, and then try
sendng agan after other send jobs
are complete.
– Erase documents stored n
memory. If the machne stll does
not operate normally, turn the
man power OFF, and then back
ON.
– Change the settng for <MAX TX
DATA SIZE> n <E-MAIL/I-FAX> n
<COMMUNICATIONS> n <SYSTEM
SETTINGS>.
– Select a lower resoluton.
– Set <DIVIDE INTO PAGES> to <ON>
n send settngs.
– Check the recpent's address.
– Check that the network s up.