Replacing The Stamp Cartridge - Canon Laser Class 810 Basic Operation Manual

Replacing the Stamp Cartridge

Sent originals can be stamped to indicate
that they have been sent. Replace the
stamp cartridge when this mark is faint
or no longer visible.
When replacng the stamp cartrdge, take care not
to allow nk to come nto contact wth your hands or
clothng. If nk gets onto your hands or clothng, wash
t off mmedately wth cold water.
1
Open the feeder cover half way.
2
With the feeder cover open half
way, push the link arm as you open
the feeder cover completely.
Push the lnk arm (A) before t catches onto
the hook (B).
The feeder cover opens as below, and the
stamp cartrdge (C) can be replaced. If the
feeder cover does not open properly, close
the feeder slghtly. Then open the feeder
cover agan, as you push the lnk arm.
10-17