PRINTER SETTINGS
4. POINT SIZE
5. PITCH
6. FORM LINES
7. SYMBOL SET
8. CUSTOM PAPER
OFF
ON
1. UNIT OF
MEASURE
2. X DIMENSION
3. Y DIMENSION
9. APPEND CR TO LF
NO
Specfes a pont sze for the default font. Ths tem appears
when the number n <FONT NUMBER> s that of a proportonally
spaced scalable font. (4.00–999.75)
Specfes the ptch for the default font. Ths tem appears when
the number n <FONT NUMBER> s that of a fxed ptch scalable
font. (00.44–99.99)
Sets the number of lnes to be prnted on a page. (5-128)
Selects the symbol set most suted to the needs of the host
computer.
Sets whether to use a custom paper sze.
Dsables you to specfy a custom paper sze.
Enables you to specfy a custom paper sze.
Selects the unt of measurement to specfy a custom paper sze.
–
INCHES
–
MILLIMETERS
Specfes the horzontal sze of the custom paper.
(05.00–14.00" (127–356 mm))
Specfes the vertcal sze of the custom paper.
(03.00–08.50" (76–216 mm))
Sets whether to append a carrage return (CR) when lne feed
code (LF) s receved.
The prnt head moves down to the next lne when lne feed
code s receved, and the margn does not change (such as the
begnnng of the next lne).
12-27