Restricting Redialing (LASER CLASS 810 Only)
You can specfy whether or not to allow usng [Redal].
1
Press [Additional Functions].
2
Press [
] or [
If the System Manager ID and System Password have been set, enter the System Manager ID and System
Password usng the numerc keys, then press [Log In/Out (ID)].
3
Press [
] or [
4
Press [
] or [
5
Press [
] or [
6
Press [Stop] to return to the standby mode.
] to select <SYSTEM SETTINGS>, then press [OK].
] to select <RESTRICT TX FUNC>, then press [OK].
] to select <RESTRICT REDIAL>, then press [OK].
] to select <ON> or <OFF>, then press [OK].
9-29