Canon Laser Class 810 Basic Operation Manual page 377

SYSTEM SETTINGS
7. POP ADDRESS
8. POP PASSWORD
9. POP INTERVAL
8. STARTUP TIME SET.
6. COMMUNICATIONS
1. E-MAIL/I-FAX
**
1. MAX TX DATA SIZE
2. DIVIDED OVER MAX
2. FAX SETTINGS
1. TX START SPEED
2. RX START SPEED
3. TX DOC. ARCHIVING
3. MEMORY LOCK
OFF
ON
1. PASSWORD
2. REPORT PRINT
Enters the logn name for access to the POP server (max. 32
characters).
Enters the password for access to the POP server (max. 32
characters).
Sets the nterval you want the POP server to check for
ncomng e-mal. If the nterval s set to 0, the POP server s not
checked automatcally (0MIN.–99MIN.).
Sets the tme perod requred to delay the startup of network
communcatons for the machne (0SEC–300SEC).
Sets the fax and e-mal communcaton.
Sets the e-mal/I-fax communcatons.
Sets the maxmum data sze for outgong e-mal messages. If
the e-mal message exceeds ths data sze lmt, t s splt up
nto several e-mal messages before beng sent (0MB-99MB).
Sets whether to dvde a document nto separate fles when t
s sent f ts sze exceeds the data sze you specfy.
– OFF
– ON
Sets the facsmle communcaton.
Sets the transmsson start speed for faxes.
(33600bps, 2400bps, 4800bps, 7200bps, 9600bps, 14400bps)
Sets the recepton start speed for faxes. (33600bps, 2400bps,
4800bps, 7200bps, 9600bps, 14400bps)
Sets whether to use TX Document Archvng.
– OFF
– ON
Sets whether to receve and store all documents n memory
and not to prnt automatcally. (See Reference Gude > Send/
Receve.)
Dsables memory lock recepton.
Enables memory lock recepton.
Regsters the password that protects the authorty for
accessng to memory.
Sets whether to prnt a report on memory lock recepton.
– OFF
– ON
12-47