SettNg Up The Stamp ActOn - Canon Laser Class 810 Basic Operation Manual

Turning the Stamp Feature ON/OFF
You can press [Stamp] to stamp orgnals when sendng or scannng them. The orgnals are
stamped accordng to the stampng condtons you set. (See "Settng Up the Stamp Acton, "
on p. 4-71.)
1
Set documents.
2
Press [Fax/Send] repeatedly to select the sending method, then press [OK].
If usng the LASER CLASS 810, you can swtch to the Fax mode by pressng [Copy/Fax].
4-73