Canon Laser Class 810 Basic Operation Manual page 343

TX/RX SETTINGS
7. TX TERMINAL ID
1. PRINTING
POSITION
2. TELEPHONE #
MARK
8. COLOR TX GAMMA
*
9. SHARPNESS
*
10. ROTATE TX
11. INIT STANDARD SET
Sets the optons for sender nformaton.
Selects where the sender nformaton s prnted n small type at
the top of each page.
– OUTSIDE IMAGE
– INSIDE IMAGE
Prefxes your number wth the abbrevatons FAX or TEL n your
sender nformaton.
– FAX
– TEL
*
Sets the gamma value for color scanned data. If the set value
corresponds to the gamma value at the recpent's machne, the
scan exposure of the output data at the recpent's machne s
automatcally adjusted to the level best suted to the qualty of
the orgnal.
(GAMMA 1.8, GAMMA 2.2, GAMMA 1.0, GAMMA 1.4)
Sets the contrast of the mages you scan. (1-7)
Sets whether to use the TX Rotaton functon. TX Rotaton
functon automatcally corrects the orentaton of the document
by rotatng the mage when sendng. For example, f you set
a document that has a horzontal orentaton vertcally on
the machne, the machne rotates the mage and sends t
horzontally.
You can use the TX Rotaton mode for an A4 and a LTR
document only. The TX Rotaton mode s not avalable f you are
usng the Drect Sendng or Manual Sendng.
Ths settngs s only enabled when sendng faxes.
– ON
– OFF
Sets whether to restore <STANDARD SETTINGS> n <TX
SETTINGS> to the default.
Press [ ] to select <YES>.
If you do not want to restore all settngs, press [
<NO>.
] to select
12-13